Learn about the air duct cleaning process to make sure you’re properly flushing your ductwork and breathing pristine air. Understand the proper equipments and the processes of air duct cleaning to be sure of the quality of air entering your lungs. For example, a sealant to get a mold infestation is not only a terrible alternative, it can make things worse. Therefore, read the following fundamental phases of air duct cleaning.
Check Before Cleaning
Check Before CleaningA routine air supply system test provides information about your duct system and the ventilation you need; it’s also helpful in identifying any airflow issues. Your air duct cleaning service provider may suggest sealing air leaks in your ducts; this saves energy and helps reduce your utility bills. An inspection may uncover a mold problem that needs to be addressed before air duct cleaning can begin. If your ductwork is made of heavy sheet metal valves, a biocide can be used to combat rust; be aware that you cannot use biocide on fiberglass or fiberglass-lined metal ductwork.
Creat Negative Pressure
Vacuuming, which creates negative pressure, uses compressed air to remove debris and dirt from the machine. It is always safe to blow dusty material into the outside air, but a vacuum cleaner with a HEPA filter should be used when blowing inside.
Clean Ductwork
Clean the channels that flow throughout the way. Tech aids such as nylon or cable brushes in combination with a high-powered vacuum in the source and return sections of the machine are used for cleaning. A vented air duct should not get wet; if it does get wet or muddy, do not attempt to clean it, as the best alternative is to replace it.
Clean Other Parts
Cleaning the dryer vent will deter a potential fire risk. Ensure that all asbestos-containing equipment must be handled by specially trained and equipped personnel. An EPA-approved disinfectant may be used to wash the inside of your ductwork in addition to the vent system, check the health and safety aspects regarding documented antimicrobial product components.
Check Result
A random visual inspection can be performed to check for the appearance of dirt in the supply and exhaust ducts and make sure the air duct cleaning was one. Verify that all atmosphere vents, both registers and grilles, and outlets, appear clean and pass back through the facility. Also, evaluate the operation of the machine after cleaning in both heating and cooling modes.